GREAT PLAINS 1205NT, Руководство оператора, Страница: 22 / 64

3/7/19 Table of Contents Index 150-131M
1205NT Table of Contents Index 18
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Prestart Checklist
High Pressure Fluid Hazard:
Escaping fluid under pressure can have sufficient pressure to
penetrate the skin. Check all hydraulic lines and fittings
before applying pressure. Fluid escaping from a very small
hole can be almost invisible. Use paper or cardboard, not
body parts, and wear heavy gloves to check for suspected
leaks. If injured, seek medical assistance from a doctor that is
familiar with this type of injury.
1. Carefully read “ Important Safety Information ,”
page 1.
2. Lubricate the drill as indicated under Lubrication ,
page 43.
3. Check all tires for proper inflation as indicated on
Tire Inflation Chart , page 54.
4. Check all bolts, pins and fasteners. Torque as
specified on Torque Values Chart , page 53.
5. Check the drill for worn or damaged parts. Repair
or replace them before going to the field.
6. Check hydraulic hoses, fittings and cylinders for
leaks. Repair or replace them before going to the
field.
7. Rotate both gauge wheels to see that drive and
meters are working properly and free from foreign
material.
8. Torque bolts shown in Figure 9 to 125 +20 ft•lbs.
Check and torque these bolts every few hours after
this, during the first days of operation.
Mis-step Hazard:
Watch your step when walking on drill ladder and
walkboard. Falling from drill could cause severe injury or
death.
Figure 9
Jack Storage Position