manualshive.com logo in svg

GREAT PLAINS 1205NT, Руководство оператора, Страница: 25 / 64

Поделиться
Скачать
GREAT PLAINS 1205NT Скачать руководство пользователя страница 25

1205NT

Table of Contents

Index

Operating Instructions

21

3/7/19

Table of Contents

Index

150-131M

Lock-out Hub.

 Make sure drive lock-out hub on left side 

of drill is disengaged before transporting, see Figure 11. 

This will prevent excessive wear of drive system during 

transport.
Transporting with Markers. Always transport markers in 

the folded position.

Parking

Perform the following steps when parking the drill. 

Refer to 

Storage

, page 44, for information on long-term 

storage preparation.
1. Park the drill on a level, solid area.
2. Lower drill until openers are resting on the ground.
3. Securely block tires to prevent rolling.
4. Remove tongue jack from storage stob. Pin jack on 

side of tongue. If ground is soft, place a board or 

plate under jack. Refer to Figure 12

5. Extend jack until tongue weight is off tractor 

drawbar..

6. Unplug hydraulic hoses and wiring harness from 

tractor. Do not allow hose ends or harness ends to 

rest on the ground.

7. Remove hitch bolt and safety chain from tractor 

drawbar.

14171

Figure 11

Lock-out Hubs

Jack storage stob

14774a

Figure 12

Jack Storage Position

Содержание 1205NT

































































Отзывы:

Нет отзывов