manualshive.com logo in svg

GREAT PLAINS 1205NT, Руководство оператора, Страница: 48 / 64

Поделиться
Скачать
GREAT PLAINS 1205NT Скачать руководство пользователя страница 48

1205NT

Table of Contents

Index

Maintenance and Lubrication

44

3/7/19

Table of Contents

Index

150-131M

Folding Marker Breakaway

Refer to Figure 33

The marker arm has a pivot at the hinge which is 

connected rigid with a 5/16 inch bolt (1). The shear bolt 

will break if excessive force is put on marker during 

operation allowing marker arm to swing away rather 

than cause damage to the marker.
Note: The shear bolt is a 5/16 x 1 1/2 inch grade 5 bolt 

and is identified by three markings on the head, 

see page 53. It must be replaced by an equivalent 

grade 5 bolt to prevent marker damage.

Storage

Store the drill where children do not play. If possible, 

store the drill inside for longer life.
1. Unload seed box.
2. Thoroughly clean seed and seed-treatment residue 

from boxes and feed cups.

3. Remove any dirt and debris that can hold moisture 

and cause corrosion.

4. Lubricate and adjust all roller chains.
5. Take special care to oil feed cup drive sprocket in its 

square bore.

6. Lubricate areas noted under “Lubrication”, page 45.
7. Inspect drill for worn or damaged parts. Make repairs 

and service during the off season.

8. Use spray paint to cover scratches, chips and worn 

areas on the drill to protect the metal.

9. Disconnect seed hoses from openers. Permanent 

elongation and premature cracking of hoses may 

occur if stored connected.

10. Cover with a tarp if stored outside.

Dir

ec

tio

n o

f tr

av

el

Figure 33

Folding Marker Breakaway

Содержание 1205NT

































































Отзывы:

Нет отзывов