01/22/2018
Table of Contents
150-285Q
706/1006NT
Table of Contents
Assembly
10
Assembly
Pre-Assembly Checklist
1.
Read and understand “
Important Safety
Information
” before assembling.
2.
Have at least two people on hand while assembling.
3.
Make sure the assembly area is level and free of
obstructions (preferably an open concrete area).
4.
Have all major components accounted for.
5.
Have all fasteners and pins shipped with drill.
6.
Have a copy of the drill Parts Manual (150-285P) on
hand. If unsure of proper placement or use of any
part or fastener, refer to the Parts Manual.
7.
Check that all working parts are moving freely, bolts
are tight, and cotter pins are spread.
8.
Check that all safety labels and reflectors are
correctly located and legible. Replace if improperly
located or damaged. Refer to
Safety Decals
, in the
“
Important Safety Information
” section of the
implement Operator’s Manual.
9.
Inflate tires to recommended pressure as listed on
the “
Tire Size and Pressure
” on page 23.
10. Tighten wheel bolts as specified on “
Torque Values
Chart
” on page 23.
11. Check for proper slack on all chains.
12. Hitch height of intended field tractor available.
Prepare Tongue for Mounting
Refer to Figure 3
1.
Remove the parking stand (1) from the stob on the
top of the tongue (or, as shown, from the top of the
rear of the folding tongue (2)).
2.
Remove six sets of fasteners from the mounting
plates on the mainframe:
(23) 803-027C NUT HEX 3/4-10 PLT
(28) 804-023C WASHER LOCK SPRING 3/4 PLT
(21) 802-212C HHCS 3/4-10X2 1/2 GR5
3.
Remove eight sets of fasteners from the rear of the
tongue:
(28) 804-023C WASHER LOCK SPRING 3/4 PLT
(23) 803-027C NUT HEX 3/4-10 PLT
and four:
(32) 806-128C U-BOLT 3/4-10 X 6 1/32 X 5 5/8
If the tongue is the folding model, check that it is both
assembled and securely unfolded. If the drill has the
standard rigid tongue, continue at the “
Install Tongue
”
on page 11.
Figure 3
Parking Stand
21828
2
1
23
28
21
28
23
32
Содержание 1006NT
