5
This bed is heavy and is best built in the room that it is intended for.
Please ensure you are building on a protective surface such as a carpet or
rug to ensure the panels are not damaged during the build.
STEP 1:
Take the 2x headboards (F), 2x headboard rails (E), 2x RH leg front panels (C) and 2x
LH leg front panels (D) and insert the SHORTER 35mm wooden dowels (#1) into the
edges of the panels, as shown.
Lightly tap the dowels with a hammer for this step.
STEP 2: Build the leg structures.
Start by securing one of the RH leg side panels (A) to one of the RH leg front panels
(C) using 3x LONGER 50mm bolts (#4) in the positions shown. Tighten fully with the
Allen key. Repeat for the second RH leg.
Now secure one of the LH leg side panels (B) to one of the LH leg front panels (D)
using 3x 50mm bolts (#4). Repeat for the second LH leg.
Tighten fully with the Allen key.
D
Hardware for Step 1:
28x #1 Wooden Dowels 35mmL
Hardware for Step 2:
12x #4 Bolts (50mm)
A
C
F
E
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#4
#4
#4
#4
#4
#4
B
C
D
2x
2x
2x
2x
