7
C
When in position, turn the 3x
cam locks (#2) on the top panel
(C) clockwise to lock in place.
STEP 7:
Push the two top panels (C) together.
Insert 3x cam locks (#2) into the large drill holes along the edge of the joined components. The arrows
should point toward the connecting edge in the top panel.
Turn all of the cam locks (#2) clockwise to lock.
Ensure that each cam lock’s arrow is
pointing towards the drill hole on the side
edge of the component.
Hardware for Step 7:
3x #2 Cam Locks
C
C
#2
STEP 8:
Insert 2x cam dowels (#1)
and 2x wooden dowels (#3)
into the holes at the back
corner of the top panel (C)
as shown.
Hardware for Step 8:
2x #1 Cam Dowels
2x #3 Wooden Dowels
#1
#3
A
B
B
Thin Part
Wide Part
STEP 9:
Position the joined base panel (A)
and back corner bars (B) on their
side, as shown.
