10
When in position, turn the 3x
cam locks (#2) on the shelf
panels (F) clockwise to lock
in place.
STEP 15:
Push the two shelf panels (F) together.
Insert 3x cam locks (#2) into the large drill holes along the edge of the joined components. The arrows
should point toward the connecting edge in the shelf panel. Turn all of the cam locks (#2) clockwise to lock.
STEP 16:
Choose your shelf height and insert 4x shelf fixings (#4) on the inside of the part built unit. Two on the left
side panel (D) and two on the back corner bars (B). The final two pegs will be applied to the right side panel
(D), once in place.
Ensure that each cam lock’s arrow is
pointing towards the drill hole on the side
edge of the component.
Hardware for Step 15:
3x
#2 Cam Locks
#2
left side
F
right side
F
Hardware for Step 16:
4x
#4 Shelf Fixings
D
B
left side
#4
