5
STEP 4:
Position the left hand front leg C over the seat corner, ensure the shaping of the leg
is sloping upward. Screw 2x longer 45mm bolts (#1) using the washers (#3) and split
washers (#4) into the drill holes.
Repeat with the right hand front leg C.
Please note: Again, it is easier to semi-tighten all the bolts first, before going on to
tighten them all completely.
STEP 5:
Ensure all bolts are fully tightened.
#2
Copyright© 2012 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
A
B
#3
#4
#2
#4
#3
Hardware for Step 4:
4x
#3 Washers
4x
#4 Spring Washers
4x
#2 45mmL Bolts
2x
2x
2x
C
#2
2x
#4
2x
#3
2x
#2
#3
#4
