4
STEP 2:
Screw 2x of the shorter 30mm bolts (#1) into the two inner drill holes using the
washers (#3) and split washers (#4) (as shown).
Please note: It is recommended that you do not completely tighten the screws when
applying them individually. Wait until all hardware is in place in the stages to follow and
semi-tightened, before tightening all securely.
STEP 3:
Screw 2x 45mm bolts (#2) into the two outer drill holes using the washers (#3) and
split washers (#4) (as shown) to secure the back panel (A).
#1
A
B
#3
#4
#3
#4
#1
#1
#4
#3
Hardware for Step 2:
2x
#3 Washers
2x
#4 Spring Washers
2x
#1 30mmL Bolts
A
B
#2
#2
#3
#4
#4
#3
#3
#4
#2
Hardware for Step 3:
2x
#3 Washers
2x
#4 Spring Washers
2x
#1 45mmL Bolts
