8
STEP 8:
Line up the back panel I with the pilot holes in the grooved edges and fix in
place with 12x domed head screws (#4).
The toy box surround is now ready to use.
Hardware for Step 8:
12x #4 Domed Head Screws 14mmL
STEP 9:
Make the toy box drawer.
Attach the L-shaped runners (#7) to the drawer side panels J & K with the flat
head screws (#5).
The wheel of the runner should be on the opposite side of the panel to the
groove and should be next to two small recessed drill holes.
The runners should be the same length as the panels and the screws should
be flat against the runner to ensure the drawer pulls out smoothly.
H
F
I
#4
#4
#4
#4
#4
#4
#4
#4
#4
#4
#4
#4
#4
#5
#7
#7
#7
#5
#5
#5
#5
#5
#5
J
K
Hardware for Step 9:
6x #5 Flat Head Screws 14mmL
2x #7 L-Shaped runners
