4
#1
#2
#3
#4
#5
#6
#7
#8
You will need
(not supplied)
Philips Head Screwdriver
#9
#10
#11
Component Check List
Hardware for Step 1:
STEP 1:
Build the Top Shelf first.
Using a Phillips screwdriver, insert 1x cam dowel (#1) in the central hole of
panel A. Add 2x wooden dowels (#2) in the remaining holes and join panels A
& B together.
Insert 1x cam lock (#3) in the central hole of panel B and turn clockwise to
lock.
NOTE: The large drill holes on the panel A to be facing the floor and they
should be facing outwards on panel B. This will ensure they are not seen once
the unit is finished.
2x #2 Wooden Dowels
2x Flat Drawer Runners
(for Toy Box Surround)
2x Handles
2x L-Shaped Drawer Runners
(for drawer)
1x Anti- Tip Kit
19x Cam Dowels
35mmL
18x Wooden Dowels
25mmL
19x Cam Locks
15mmL dia
12x Domed Head Screws
14mmL
12x Flat Head Screws
14mmL
4x Flat Ended Screws
24mmL
4x Screws
30mmL
#3
#2
#2
#1
A
#2
#1
1x #1 Cam Dowels
1x #3 Cam Locks
IMPORTANT:
Make sure that the
small drill holes on the edge of panel A
are next to the connection to panel B -
they will be needed at a later step.
#3
B
Using Cam Locks:
When inserting into the panel, ensure that each cam lock’s
arrow is pointing towards the drill hole on the side edge
of the panel & the dowel that it will be receiving.
When the panels are in the connected position, using a
screwdriver, turn the cam lock in a clockwise direction to
lock and secure.
