PREFACE
This manual is provided to prevent service personnel from committing an act that results in the risk
of fire, electric shock, or injury to persons. Only trained service personnel should receive, unpack,
and assemble the racks. In addition, only trained service personnel should install equipment in
enclosures.
SAFETY SYMBOLS USED IN THIS MANUAL
This manual provides general safety guidelines to be observed during installation, operation, and
maintenance of the racks.
WARNING:
Failure to follow directions in the warning could result in injury to persons or loss of life.
INSTALLATION
RECEIVING, UNPACKING, AND REMOVING THE RACK
Inspect and report damage before receiving. Unpack the rack by carefully removing the corrugated
cartons and corners. Avoid damaging the rack when removing packaging.
SERVICE
Racks should be repaired by personnel trained by Great Lakes, or returned to Great Lakes for repair
or replacement. Contact Great Lakes Technical Support at 814.734.7303 or at
INSTALLATION QUESTIONS?
Call Technical Support at 1-866-879-4522 or email [email protected]
WHAT’S INCLUDED
VCM or VCMX unit, assembled
Repositionable cable slack spools (quantity specified in chart above)
Installation hardware
Installation instructions
VCMX, FRONT ONLY CONFIGURATIONS (PAGE 8)
Part No.
RMU
Hmm
Wmm
Dmm
Cable Fill
VCMX-45U-1012FO/FR-M
45
2134
254
305
82
VCMX-52U-1012FO/FR-M
52
2445
254
305
82
VCMX-59U-1012F0/FR-M
59
2756
254
305
82
*Manager is recessed when ganged with racks, 6" spacing
2
