2
PREFACE
This manual is provided to prevent service personnel from committing
an act that results in the risk of fire, electric shock, or injury to persons.
Only trained service personnel should receive, unpack, and assemble
the E cabinets. In addition, only trained service personnel should install
equipment in Cabinets.
SAFETY SYMBOLS USED IN THIS MANUAL
This manual provides general safety guidelines to be observed during
installation, operation, and maintenance of the E cabinet.
WARNING:
Failure to follow directions in the warning could result in
injury to persons or loss of life.
CAUTION:
Failure to follow directions in the caution could result in
damage to equipment or storage data.
SAFETY CONSIDERATIONS
WARNING:
Improper handling and use of the E cabinet could result in
equipment damage, serious injury, or possible death.
Only trained service personnel should be used to remove the cabinet
from the pallet. Also, be sure you have a sufficient number of service
personnel. Do not attempt to move cabinets by yourself.
Only UL
®
Listed ITE (Information Technology Equipment) units should
be installed inside the E cabinet.
Be sure to read and follow all individual manufacturer equipment
manuals for safety and installation instructions.
Proper spacing is required when installing electrical equipment
to avoid electrical shock. Maintain minimum spacing between the
accessories and components and the computer cabinet assembly for
safe operation of the equipment when installed in accordance with the
National Electric Code ANSI/NFPA 70-1999.
The ambient temperature operating range for the E cabinet and
accessories is +50 to +95° F (+10 to +35° C).
The non-operating temperature is -4 to +140° F (-20 to +60° C).
