TP-183P User Manual
Operation 4-3
4.2 Adjust the Plotter
For loading media properly, follow below procedures to adjust the plotter:
Step 1
Use the lever on the upper right side of the plotter to raise or lower down pinch rollers. Pull the
lever forward until it makes a clicking sound then the pinch rollers are raised (Figure 4-9).
Lever
【
Figure 4-9
】
Step 2
Load your media on the platen and slide it under the pinch rollers from either the front side or
the backside. The
color
alignment rulers
on the platen extension will help you to adjust the
media precisely.
Step 3
Move the pinch rollers manually to proper positions. Be sure the pinch rollers must be
positioned above the grid drum. The
white marks
on the main beam reveal where the grid
drums are located (Figure 4-10)
.
White marks
【
Figure 4-10
】
【
Figure 4-11
】
Note:
Always adjust the position with the pinch roller raised.
Move the pinch roller by applying force at the rear portion of the pinch roller support.
Do not move the pinch roller by holding its front rubber roller
(Figure 4-11).
