Great Central Models Robinson GCR Class 8B Atlantic LNER C4, Инструкция по сборке

Страница: 39 / 42

Page 39 GCR Class 8B
Page 39 GCR Class 8B
on the chassis sandbox thus preventing a proper fit (in my test
case it bent the footplate!). Add Oil Filler Caps (38-43) to the
top with the hinge (flat) to the front of the locomotive if these
are required (hardly noticeable).
Smoke Box Door Drwg. 258 - Remove Smoke Box Door hinge
(125) from the fret - solder one hinge to door side and use the
extension as a support for the hinge mechanism consisting of
some very short lengths of 0.8 mm tube and 0.45 brass wire -
its easier than it sounds and looks far more accurate than a
cast part.
The smoke box door is pre-drilled 1 mm for the Markits door
handle.
Smoke Box Door Handle - use the supplied Markits version,
then fit the smoke box door to the front of the smoke box
using araldite.
Snifter Drwg. 228 - for superheated locomotives fit just behind
the chimney.