GRE PSR-200U, Руководство пользователя

Страница: 25 / 40

25
3. Press PSE to start tune.
To change the tune direction, press
6
or
5
.
To program tuned broadcast into FM Radio Channel
1. Press FM RADIO if your scanner does not stay the FM RADIO mode.
2. Press FUNC .
3. Press ENT to store the lowest FM Channel memory.
Or press PGM to select FM channel number. (See “Copying a Frequency
into a Specified Channel” for more details.) Then press ENT .
Monitoring Stored FM Radio Channel
In FM Radio mode, there is little thing that becomes interrupted the
broadcast and scans to the advanced channel, and operate the channel by
the manual operation.
Follow these steps to manually select a FM Radio channel.
1. Press
FM RADIO (Orange) to enter FM Radio mode.
2. Pressing SCAN/MAN until MAN appears.
3. Enter the channel number (1–20).
4. Press
SCAN/MAN again.
Pressing
5
or
6
to advance/return the FM Radio channel.
LISTENING TO THE MAEINE BANK
To listen to the marine bank, pressing SRCH to select marine band.
MAr
appears abour 2 seconds, then the scanner starts searching from marine
channel 16.
To stop searching the channels, press
PSE . SRCH disappears and MAN
appears.
To change the channel manually, press
5
or
6
.
To search through the marine bank again, press PSE . MAN disappears and
SRCH appears. To change the searching direction, press
5
or
6
.
You can select a marine channel directly. When the scanner stops scanning
the marine bank, use the number keys to enter the two-digit channel
number.
Note: While Marine band search, lock out functions. See “Locking Out
Marine Channels” on Page 31.
PSR200U-OM.indd 25 2010/02/22 16:24:43