21
Notes:
• You can use the scanner’s delay feature while searching the banks, see
“Delay” on Page 30.
• The scanner does not search locked-out frequencies while searching
ranges. See “Locking out Channels or Frequencies”.
The scanner contains these preprogrammed search ranges, stored in the
search bank.
Emergency (Fire/Police)
Aircraft
Ham
Marine
Follow these steps to select preprogrammed search bands and search them
for active frequencies:
1. Repeatedly press
SRCH
(Orange) to select your desired search bank (Fire/
Police, Aircraft, Ham, or Marine).
Note:
If you want to listen to marine band, see “Listening to Marine Band”.
The scanner displays
FIrE/POLICE
or
AIr
or
HAM
. After about 2 seconds,
the scanner starts search.
Notes:
• To reverse the search direction at any time, press
5
or
6
.
• To pause the search while receiving a signal, press
PSE
. To resume
searching, press
PSE
again.
• If necessary, you can select search groups using the number keys.
• Pressing
SRCH
to advance the search bands.
2. To search for another active frequency in the selected band, press
5
or
6
.
To select a different band and search for another active frequency, repeat
Steps 1.
Using Tune
During a tune, the scanner tunes up or down, starting from a frequency you
specify. Follow these steps to use tune.
Note:
You can use the scanner’s delay feature while using tune.
1. Press
TUNE
.
PSE
and start frequency appears.
(If your scanner enters into FM RADIO mode, the scanner tunes FM radio
band. If your scanner enters into SCAN or SEARCH mode, the scanner
tunes all receiving frequency band without FM radio band.)
PSR200U-OM.indd 21
2010/02/22 16:24:43
Содержание PSR-200U
Страница 39: ...39 NOTE PSR200U OM indd 39 2010 02 22 16 24 44...