Auto leaving message
This function let your visitors to leave a video message for you while nobody is at home. You should
activate AUTO ANSWER for ANSWER MODE function in the SYSTEM SETTINGS of your monitor
before leaving home to activate this function.
When the visitor presses call button on the door panel and the chime time ends, visitor can hear a
voice from the door panel and have 20 seconds after „beep” signal to leave a message for you.
DVR function
DVR function lets you record video from any panel or camera in your system by predefined
schedule.
Enable DVR in SYSTEM SETTINGS --> DVR SETTINGS to activate that function.
You can also enable MOTION DETECTION SENSITIVITY. In that case video recording starts only when
motion detected and 10 minutes after that. Motion detects only during schedule time interval.
MOTION DETECTION SENSITIVITY can be set as LOW, NORMAL, HIGH, or can be disabled.
BEGIN TIME and END TIME defines schedule time interval. Recording starts at BEGIN TIME and ends
at the END TIME, if MOTION DETECTION SENSITIVITY is disabled. You will see the image from the
camera or door panel and sign „DVR IS WORKING” on the monitor screen when DVR starts working.
FRAME RATE and RESOLUTION defines quality of recorded image. Different values of quality can be
availble depends on the micro SD card capacity. Minimal micro SD card capacity to start DVR
function is 2Gb. Maximum frame rate and resolution availble from 8Gb micro SD card capacity.
As RECORD SOURCE you should choose video channel for the recording (only one video channel for
recording can be applied).
SCREENSAVER TIME it is a time of display work in DVR mode. After that time display will be off, but
DVR still working.
Notes:
1) DVR starts working in 10 seconds after BEGIN TIME.
2) DVR records only video,
sound doesn't records.
MAX V2
User's manual
10
9
Manual photo and video capturing
You can make manual photo or video capturing during talking or viewing door panels or cameras.
Shortly press button to make a photo.
Press button for 2 seconds to start video recording. Shortly press button again to end video recording.
Photo and video view
If someone visit your house while you was absent then button will be blinking with green color.
Press button to enter Multimedia Manager.
You will see that and icons are in red frame when you enter Multimedia Manager. Press
or button to choose from photo or video message view. Then press button to choose
the year and month you want to view. You can choose the video or photo by pressing or
buttons and then press button to view the target file.
Same way you can view DVR records in menu.
Note: all file names consits of the date and time it was created, for example: 2011-01-01 11:30:20, means that file
was created on 1st of January 2011, 11:30 o'clock.
Fast forward
You can press button during video playing to accelerate playing in two times (2x). Press
button one more time to accelerate playing up to 4x, and so on: 8х, 16х, 32х. If you will reach 32х
speed playing and press button one more time, system will back to the normal playing mode
without acceleration.
Pause
Shortly press button during playing to stop record play. Press button again to start record
play.
Volume settings
Press and hold button during 2 seconds while playing to activate volume control in upper right
corner of the display. Shortly press or button to decrease or increase playing volume.
DVR characteristics
Record resolution
2 Gb
less than 2 GB
1, 2, 5 fps
1, 2, 5, 10 fps
1, 2, 5, 10 fps
1 fps
4 Gb
8 Gb
16 GB and more
320*240 pixels
DVR is not active
More than 24 hours
More than 24 hour with
1 fps record frame rate
320*240 pixels
320*240 pixels
320*240 or 640*480
pixels
microSD volume
Record frame rate
Record length
More than 96 hour with
1 fps record frame rate
More than 192 hour with
1 fps record frame rate
Pre/-
Pre/-
Pre/-
Pre/-
Pre/-
Pre/-
Next/+
Next/+
Next/+
Next/+
Next/+
Next/+
Menu/Set
Menu/Set
Menu/Set
Menu/Set
Menu/Set
Menu/Set
Menu/Set
