First Contact
M20 PIX Machine - Electronic Engraving machine . 7
Description
The M20 PIX is an engraving machine.
It has a keyboard for controlling the machine
Files to be engraved are transferred from the computer to the machine by the intermediary of a cable which is plugged
into the USB port on the M20 PIX machine.
The actual engraving process is controlled by the spindle.
The M20 PIX is a machine for flat work :
- It is supplied with a vice.
The M20 PIX machine cover a maximum engraving surface area of 3.9"x 3.9"
(100 x 100 mm) (Max. pen diameter = 1.1" =28 mm).
Front view of the machine
Engraving table
A. Standard base
B. Control panel (flexible
9-key control keyboard)
C. Vice
E. Protective housing
H. Accessories drawer
J.
Tool holder
K. A d j u s t m e n t k n o b o f t h e s p i n d l e p r e s s u r e
(4 positions)
L.
General shutdown button used as an immediate stop
M. Open-close tightening knob of the jigs
T.
One pair of jigs
M20 PIX
Tool holder
(photo 2)
J1. Diamond
J6. Index finger
J9. LASER diode
CAUTION - LASER RADIATION
Do not stare into beam
LASER diode - Wavelength: 630-680nm - Max. Output < 1mW
CLASS 2 LASER PRODUCT
