@SWB7 USER MANUAL
5
BASIC FUNCTION OPERATION
Press and hold this key for 2 seconds to turn off the balance.
Press this key to turn on the balance
1
. To select the desired weight unit.
2
. To exit from setup mode.
1.
To reset the weight to zero “0”, but the display value has to be
lesser than ± 2% of maximum capacity.
2.
To move one space to the left or downward in setup mode.
1.
To subtract the container´s weight.
2.
To move one space to the right or upward in setup mode.
1.
To view gross or net weight when the balance is on tare
status. All other keys will be disabled when gross weight is activated.
2.
To increase values upward in setup mode.
1.
Key of confirmation in setup mode.
2.
Manually transmitting data through RS232 to computer or
printer.
CONNECTION OF LOAD CELL AND RS232
1) Connection of the load cell to indicator
INDICATOR
LOAD CELL
1 ------------- +Excitation
2 ------------- +Sense
3 ------------- -Excitation
4 ------------- -Sense
5 ------------- +Signal
6 ------------- (GND) shield
7 ------------- -Signal
