GB – 16
INSTALL MESH BAGS (FIGURE 16)
1. Install mesh bags (item 24) on cover assembly
(item 10) with the heat resistant (smooth side) side
of the bags facing the unit.
INSTALL HOSE
Trim Hose (Figure 17)
NOTE:
Different size decks require different hose
lengths.
1. Position bagger hose (item 23) and trim to fit if
specified in figure 17.
Install Hose (Figure 18)
1. Install bagger hose (item 23) on blower and idler
assembly (item 1) and cover assembly (item 10).
2. Flip up thumb latch and push bagger hose (item 23)
into the latch. Flip down the latch, making sure the
latch is attached to a rib on the hose.
CAUTION:
MAKE SURE the heat resistant
(smooth side) side of the mesh bags are facing
the unit.
Thread bag frame (item 26) through
sleeve in mesh bag (item 24).
Install 3/8 x 1/2 x 3 plastic tube
(item 25) on each end of frame and
push the ends together.
Figure 15
Mower Deck
Hose Length
42-Inch
Trim to fit.
48-Inch
Does not need to be trimmed.
54-Inch
Does not need to be trimmed.
Figure 17
Figure 16
MAKE SURE the heat
resistant side (smooth side)
faces the unit.
OEe022
Hose
Length
