GRAUPNER Starlet 50, Инструкция по эксплуатации

Страница: 6 / 48

Starlet 50
6
Accessories
Recommended motors and accessories for the Starlet 50
Motor Capacity
cc Order
No. Expansion silencer Exhaust
manifold (Tuned pipe)
silencer
OS MAX 46
FX-HG 7,45 1893 1809.33
1871.72 2259 1783A or
2272
OS MAX 50
SX-HG 8,17 1921 1809.33
1871.72 2259 1783A or
2272
Glowplug battery, e.g.
Varta RSH 4 Order No. 1353
Varta RSH 7 Order No. 1352
2 V glowplug battery Order No. 3694 ( Use only with resistor,
2 V glowplug battery Order No. 771 Order No.1685 or 1694. )
Fuel
TITAN S 12 Order No. 2612
AeroSynth COMPETITION SX-10 Order No. 2811
Starter
Electric starter, Order No. 1628 or 1626
12 V starter battery, Order No. 2592 or 2593.
Suitable main rotor blades
Order No. 1291.1 Wood, reflex, 500 mm long Rotor Ø 1157 mm (supplied)
Order No. 1296 GRP, reflex, 552 mm long Rotor Ø 1261 mm
Order No. 1269 GRP, symm., 552 mm long Rotor Ø 1261 mm
Order No. 1271 GRP, symm., 602 mm long Rotor Ø 1361 mm
Radio control equipment: see main Graupner catalogue
We recommend that you use a radio control system equipped with special helicopter functions,
or a micro-computer radio control system such as the mc-12, mc-14, mc-15, mc-19, mc-22, mc-
24.
As a minimum your RC system must include a 3-point swashplate mixer and the ability to
control five servos for the functions pitch-axis, roll, collective pitch, tail rotor and
throttle.
Servos :
Use only high-performance
servos
such as the C 4041, Order No. 3916, or other servos of
equal or better quality.
Gyrosystem :
Gyro-System PIEZO 5000, Order No. 5146 with Super-Servo DS-8700G, Order No. 5156 or
Gyro-System PIEZO 550, Order No. 5147 or Gyro-System G490T, Order No. 5137
Electronic speed governor:
mc-HELI-CONTROL, Order No. 3286
Receiver power supply :
For safety reasons we recommend that you install a battery with a capacity of at least 1800
mAh, and a switch harness designed to cope with heavy currents, i.e. with heavy-duty cables.
We recommend the “Power switch harness“ with charge socket, Order No. 3050, in conjunction
with the 4RC-3000 MH receiver battery, Order No. 2568
On no account use a receiver battery with more than four cells.
You can monitor the state of your battery voltage constantly by using the NC battery controller,
Order No. 3138.