GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! Liability for printing errors excluded. We reserve the right to introduce modifications. Sous réserve de
modifications! Nous ne sommes pas responsables d’éventuelles erreurs d’impression!
#0059017
06/2008
16
Wiring diagram
Speed controller
To receiver
Motor
G2 connector
Speed controller
Drive accu
Accu
G2 connector
Maiden run
Give all the batteries a full charge, and carefully test the model’s working systems in turn.
IMPORTANT
:
ensure that the hatch cover is watertight. You are now ready for the boat’s maiden run. Take your time to
become accustomed to the model’s handling characteristics. The boat is very fast, and therefore requires
a suitably large area of water. Don’t let the boat get too far away from the bank.
All of us at Graupner hope you have many hours of pleasure running your SPACEBIRD.
Parts List
Part No. Description
No.
Material
Dimensions and thickness in mm
1
Boatstand, front section
1
Wood
4 mm plywood
2
Boatstand, rear section
1
Wood
4 mm plywood
3
Boatstand, side panel
2
Wood
4 mm plywood
4
Servo mount, front
1
Wood
4 mm plywood
5
Servo mount, rear
1
Wood
4 mm plywood
6
Servo mount, base plate
1
Wood
4 mm plywood
7
Rudder servo
1
Ready made
Order No. 3899
8
Swivel pushrod connector
2
Ready made
Consisting of metal barrel, plastic
nut and M3 grubscrew
9 Hull
1
GRP
Ready
made
10
Hatch cover
1
GRP
Ready made
11
Rubber bellows
1
Rubber
Ready made
12
Tiller
1
Various
Plastic tiller with metal collet and M3
socket-head screw
13 Rudder
1
Plastic
Ready
made
14
Motor
1
Ready made
See Accessories
15
Suppressor capacitor
1
Ready made
See Accessories; not required for
brushless motor
16
Speed controller
1
Ready made
See Accessories
17
Water-cooling coil
1
Ready made
Aluminium tube, 4 / 3 mm Ø, coiled
