10
Control surface travels
Ailerons
10 mm up, 10 mm down
)
Elevator
11 mm up, 11 mm down
) 30% exponential
Rudder
22 mm right, 22 mm left
)
The stated travels are only our recommendation; you may wish to adjust them to suit your personal flying
style.
Important:
When fitting and adjusting the various linkages you should ensure that they move freely, without binding, are
able to move to their full extent - including trim travel - and are not obstructed mechanically at any point.
When you move the rudder stick to the right, the rudder should also deflect to the right (left stick: left rudder).
Pull the elevator stick back towards you, and the elevator must deflect up (stick forward: elevator down). If
you move the aileron stick to the right, the right aileron should rise, the left aileron fall. When you move the
throttle stick forward, the motor should run to the full-throttle position, i.e. the carburettor barrel should be
fully open.
Finally - we hope you have many hours of fun and pleasure flying your SKY HERO II.
Yours - the Graupner team
GRAUPNER GmbH & Co. KG
D-73230 KIRCHHEIM/TECK
GERMANY
We reserve the right to introduce modifications. No liability for printing errors.
10/2005
Made in Vietnam
