GRAUPNER PESO QR Скачать руководство пользователя страница 18

 

1

 

 

to Order No. 

4542

 

 

Building instructions 

 

PESO QR 

 

 

For GRAUPNER COMPACT 340 direct-drive system 

and 7 cells 

 

This model requires a 3-function radio control system 

 

Safety notes

 

Please be sure to observe the following safety notes. 
If you ever dispose of the model please pass on these safety notes and the quick-build plan to the new 
owner. 
 
For reasons of safety only the accessories described in the catalogue and listed below should be used in this 
model. The upper limit for the flying weight is 1400 g, and this must not be exceeded under any 
circumstances. 
 

Important safety notes 
Liability exclusion 
As manufacturers, we at Graupner are not in a position to influence the way you build and operate 
your model, and we have no control over the methods you use to install, operate and maintain the 
radio control system components. For this reason we are obliged to deny all liability for loss, 
damage or costs which are incurred due to the incompetent or incorrect use and operation of our 
products, or which are connected with such operation in any way. 
 
Unless otherwise prescribed by binding law, the obligation of the Graupner company to pay 
compensation, regardless of the legal argument employed, is limited to the invoice value of that 
quantity of Graupner products which was immediately and directly involved in the event in which the 
damage occurred. This does not apply if Graupner is found to be subject to unlimited liability 
according to binding legal regulation on account of deliberate or gross negligence. 

 

Be sure to read right through the instructions covering assembly and operation of your model before 
you attempt to operate it for the first time. You alone are responsible for the safe operation of your 
radio-controlled model. Young persons should only be permitted to build and fly this model under 
the instruction and supervision of an adult who is aware of the hazards involved in this activity. 
These operating instructions must be stored in a safe place. If you ever dispose of the model, be 
sure to pass them on to the new owner. 
If you have queries regarding the safe operation of this RC model aircraft, please contact your local 
model shop in the first instance, where the staff will be pleased to help you. 
 
Radio-controlled model aircraft are demanding and potentially dangerous objects, and call for a high 
level of technical knowledge, skill and a sense of responsibility on the part of the operator. 
 
In legal terms our models are classed as aircraft, and as such are subject to legal regulations and 
restrictions which must be observed. Our brochure “Modellflugrecht” (Model Aviation Law) is 
available under Order No. 8034.01, and contains a summary of all these rules. Your local model shop 
should have a copy which you can read. There are also Post Office regulations concerning your 
radio control system, and these must be observed at all times. Refer to your RC system instructions 
for more details. 
 
Be sure to use only those parts included in the kit, together with other genuine Graupner accessories 
and replacement parts as recommended expressly by us. Even if you change a single component of 
the power system you can no longer be sure that the system will work reliably, and such changes 
also invalidate your guarantee. 

Содержание PESO QR


































Отзывы: