P3
LED Function
< LED arrangement of transmitter >
1) LIGHT ON / OFF Function
Yellow Led
① When the lights are off, LED stay OFF condition.
② When the lights are on, LED stay ON condition.
（default status）
2) SPEED Attitude and Rate Function
Red Led
① Attitude mode : LED stay ON condition.（default
status）
② Rate mode : LED blinks with one second intervals.
3) Camera function （Optional feature）
Green Led
① When power is switched on, stay On condition.
--> Photograph mode （default status）
② When movie button is pressed, LED blinks with one
second intervals.
--> Video mode
4) Binding and Transmitter status function.
Red Led （Status Led）
① Show Power and Binding
② If device is not bound, LED blinks with 0.5 second
intervals.
③ If device is bound, LED stay ON condition.
Status
Discription
Red LED
Green LED
Buzzer
Bind range
Bind status (No
bind)
blinking (1s)
low beep(1)
Bind Success,
on
low beep(2)
RX receive OK
on
Range Test
fast blinking
low beep(2)
/2sec
Error
Low Voltage
fast blinking
High beep(4)
/2sec
Sensor Warring
High beep(3)
/2sec
Rx Voltage,
Temp Error
fast blinking
High beep(2)
/2sec
Receive rate
low, No RX
slow blinking
High beep(1)
/2sec
Factory Error
Low beep(1)
/2sec
Normal
mode
Trim inc/dec
low beep(1)
/click
Trim 0%
High beep(1)
/click
Program
mode
Program mode
start
1 blink
low beep(1)
Program mode
exit
low beep(1)
Servo Reverse
(Normal)
1 blink
(5times)
low beep(1)
Servo Reverse
(Reverse)
2 blink
(5times)
low beep(2)
ATV 100%
High beep(1)
Fail Safe mode
start
2 blink
low beep(2)
Fail safe (trim
dn, hold)
1 blink
(5times)
low beep(1)
Fail safe (trim
up, fail)
2 blink
(5times)
High beep(1)
Stick
Calibration
Calibration
mode start
3 blink
Stick move done
3 blink
(3times)
3 blink
(3times)
low beep(2)
Dead range set
Dead
blink/3sec
