System Mode
Model Selection; Model Name Entry
36
System Mode
Model Selection
The mx-12 system offers memory for ten completely
separate models. Therefore, it is possible to have a
mixture of helicopter and airplane setups retained in
memory. It is also recommended that the Model Name
Entry function be used in conjunction with each model
setup. Another very useful function of the Model Selec-
tion function is the ability to set one aircraft up several
different ways. This is helpful when multi-task perfor-
mance is desired.
Model Number (1~20)
Type
Modulation
Model Name (If programmed)
Go to model name
menu
Go to Wing Type or
Swash Plate menu
Toggle between
Model and Timer
Change selected
character
Clear Timer
(when selected)
Accessing the Model Select Function
1. While pressing the Down and Select keys, switch the
transmitter to the ON position to enter the Model
select mode.
2. Model Select will be displayed on the upper left
portion of the LCD. If not, press the
Up
or
Down
key until
MODEL SEL
is displayed.
3. Pressing the (+) or (-) key will select among each of
the ten models available. Notice that as each model
is selected, its name appears in the LCD.
4. Once the desired model is displayed on the left,
pressing the
Down
and
Channel
keys simultane-
ously will exit the Model Selection function and
establish the model displayed as the new current
model.
5. Press the
Select
key to select the timer function to
clear the Total Timer. Press the
Clear
key to clear
the Total timer.
6. Press the
Down
key to access the
WING TYPE
function.
7. Press the
Up
key to access the
MODEL NAME
function.
8. Press the
Down
and
Select
keys simultaneously
to exit the
MODEL SEL
function.
Model Name Entry
The mx-12 allows on 8-digit name to be input for each
of the ten models available. The current model will be
displayed in the Normal display.
Model number
Type
Modulation
Model name beeing programmed
Go to Model
Type menu
Go to Model
Select menu
Select
character
Change selected
character
Reset selected
character to blank
space
Accessing the Model Select Function
1. While pressing the Down and Select keys, switch the
transmitter to the ON position to enter the Model
select mode.
2. Press the
Up
or
Down
key until
MODEL NAME
is
displayed.
3. Press either the
Up
or
Down
key to select the first
character for the model name.
4. Press the
Select
key to advance the character
selection to the next character.
5. Repeat this procedure until all eight characters have
been selected.
6. Press the
Down
key to access the
MODEL SEL
function.
7. Press the
Up
key to access the
MODEL TYPE
Selection function.
8. Press the Down and Select keys simultaneously to
exit the MODEL NAME function.
Selectable character:
