GRAUPNER HoTT GR-12L S1012, Руководство пользователя, Страница: 9 / 20

9 / 20
S1012_GR-12L_DE_V1sh
Installa tion
The receiver must be protected against dust, exhaust gases, splash
water, etc. in the model. When you install your receiver, make sure
that it is not excessively airtig ht to prevent it from overhea ting during
opera tion.
Servo cables may not be wound around antennas or run next to
them. Make sure that the cables cannot shift to lie directly adjacent
to ant ennas during flig ht.
In the case of carbon fib re fuselage, at least the last 35 mm of the
antennas shall be routed from the fuselage.
Connections
Connect the devices that have to be connected to the receiver to the
row of sockets on one end of the receiver. The servo c onnections of
the Graupner -HoTT receiver are numbered.
The polarity of the plug-in system cannot be reversed. Do not apply
force.
Note
For the GR-12L HoTT receiver, insert the connectors with the brown
or black cable upwards.