GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
11/2013
4
With the canopy removed, slide both wing panels onto the joiner and up to the
fuselage, threading the aileron pushrods through the pushrod connector barrel.
The photo shows the left-hand wing panel being fitted; note that the leading edge is
angled slightly downwards.
When both wings are in place, locate the rotary latch on the underside, and turn it
through 90° to hold the panels securely against the fuselage. Now immediately
tighten the aileron pushrod clamping screw as described earlier.
Caution: the model
could crash if the two wing panels are not secured, or if the clamping screw in
the pushrod connector is not tightened properly.
