GRAUPNER HOT TG/mz-12, Руководство по эксплуатации

Страница: 27 / 75

6. RF sett (Aircraft and Helicopter)
The RF function of the transmitter can be programmed, it contains 6 models of stick mode, timer,
receiv out, rx bind, range test, RF transmit.
Stick mode
The mz-12 has four stick modes with the two dual axis sticks. The user can select one among the
four default stick modes the default mode is the mode 1.
•
Timer
The mz-12 has four stick modes with the two dual axis sticks. The user can select one among the
four default stick modes the default mode is the mode 1.
•
Receiv out
For the maximum flexibility of the receiver socket assignment, the mz-12 provides to swap over the
servo outputs 1 to max.6. If you try to use more than 1 servos at the aileron or the elevator or the
rudder, the receiver output socket can be assigned as you intend.
•
Rx bind : The receiver must be bound to the transmitter before the receiver will operate. Binding
teaches the receiver the specific code of the transmitter, so it will only connect to that transmitter.
•
Range test : The Range Test function reduces the power output. This allows for a range test to con-
firm the RF link is operating correctly. Perform a range check at the beginning of each flying session to
confirm system operation.
•
RF transmit : RF transmit function allows to turn on/off the RF power output
27
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press