GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors. 01/2011
- 3 -
The LiPo battery is fully charged when the green monitor lamp goes out. When this
happens, disconnect the LiPo battery and the mains PSU to end the charge process.
Open the battery compartment on the underside of the transmitter, and insert the AA-
size dry cells as shown in the photo. Caution: maintain correct polarity at all times.
Close the battery compartment again, and the transmitter is ready for use.
