GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors. Id.-Nr. 0062439 5/2011
-
4
-
Checking the control surfaces
The stick mode at the transmitter should be set as shown in the photograph: throttle
(motor speed) and direction (aileron) on the right-hand stick. Stick back (towards you)
equates to motor off; stick forward means full power. Elevator control should be on
the left-hand stick: pulling the stick back deflects the elevator up; pushing it away
from you produces down-elevator.
The rudder is operated by moving the left-hand stick left and right. If any function
works the wrong way round, use your transmitter’s servo reverse menu to correct that
channel.
Please read through the operating instructions for the BRUSHLESS CONTROL
18 speed controller; these are supplied separately.
Fitting the propeller
If you have to replace the propeller, install it as shown in the photo. Tighten the
spinner using a 1.5 mm Ø steel rod.
Caution: fit the propeller with the lettering facing forward, i.e. towards the
model’s nose. If you fit it the other way round, motor power will be greatly
reduced.
