GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors. Id.-Nr. 0062439 5/2011
-
2
-
Please be sure to read through the Safety Notes in the Appendix to these operating instruc-
tions. If you ever dispose of the model, it is important to pass on the complete building
instructions to the new owner.
Introduction
The ELEKTRO-ROOKIE QR is an RC model aircraft designed expressly for the new-
comer to model flying, and offers a superb performance in the air. For safety reasons
the model’s all-up weight should not exceed 850 g.
RC system accessories (not included)
GRAUPNER MX-12 HoTT 2.4 COMPUTER SYSTEM
Order No. 33112
Assembling the model
To remove the canopy (2) grasp it by both sides at the rear, and pull it up and off.
The photo shows the canopy (2), removed from the fuselage (1). if the retainer clip
grips too strongly for comfort, bend the two claws outwards, working gently and
evenly.
First connect the elevator pushrod to the outer hole in the elevator horn, then place
the tailplane (3) on the fin and fit the countersunk screw (4) to hold it in position. You
will need a suitable cross-point screwdriver for this; the tool is not included in the
pack.
