GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors
12.2010
7
Use your fingertips to locate the holes for the tailplane retaining screws on both
sides of the tailplane, and melt the film over them with a hot soldering iron.
Temporarily fix the tailplane to the fuselage using the M3 x 16 socket-head screws
provided. Slip the elevator pushrod into the guide tube, working from the tail end of
the fuselage. Screw the locknut and clevis on the threaded end, and connect the
clevis to the elevator horn as shown.
