GRAUPNER 9944.100, Руководство пользователя

Страница: 7 / 16

9944.RTF_jh_V1
7- 16
Controls before the start

Before each use, check proper function. For this purpose
switch on the transmitter and the receiving system. Check
that all controls are in neutral position, function properly and
turn down the correct side.

When flying a model aircraft for the first time, it is advanta-
geous if an experienced helper stands aside in the review
and the first flights.

Propellers powered by a motor represent a constant risk of
injury. Do not touch them with any part of the body! A rapidly
spinning propeller can e.g. cut a finger!

Keep well out of the rotational plane of the propeller! A part
of it or the entire propeller could broke and fly off at high
speed, hitting you or third parties. This can cause serious
injury. Make sure that no object gets in touch with a revolv-
ing propeller!

The blockage of the propeller, for any object must be
excluded.

Check each time before the model itself and everything
attached to it (e.g. propeller, tailplane etc.) is in good condi-
tion and undamaged. The model may be taken in operation
only after removal of all defects.

Radio interference caused by unknown sources can occur
without warning! The model is then uncontrollable and com-
pletely unpredictable! Do not leave the radio control system
unattended, to prevent operation by third parties.

Electric motor should be activated only if there is nothing in
the rotational plane of the propeller. Do not attempt to stop
the spinning propeller. Power the electric motors only with
the propeller installed.

The attitude of the model must always be clearly visible
throughout the flight, to ensure always a safely use and avoid
problems. Familiarize yourself during the flight, if any mal-
function / interference becomes noticeable, the landing must
be initiated immediately for safety reasons. You always give
way to other aircraft. Start and landing strips should be kept
free of people and other obstacles.