GRAUPNER 9393, Инструкция по эксплуатации

Страница: 32 / 50

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler 02/2007
32
Care and maintenance
•
Clean the model carefully after every flight, and remove any dirt from the
propeller. Clean the aeroplane and the RC components using suitable cleaning
agents only. Ask your model shop for information if you are not sure.
•
If the model is not to be operated for a considerable time, it is important to clean
and re-lubricate all the moving parts.
Notes on completing the model
•
Before building the model it is important that you study the plan and read the
instructions right through to the end, referring to the Parts List all the time. In
general terms the instructions and the Parts List reflect the sequence of
assembly.
•
Tools can be dangerous; please be aware of the hazards involved in using them.
•
Use cable of adequate cross-section, capable of carrying the currents which will
flow when the model is flying.
•
Deploy the receiver aerial as far away as possible from high-current cables - at
least 3 cm.
•
Before making any glued joints, be sure to clean the surfaces and remove all
traces of grease. We recommend sanding lightly, or wiping with a non-greasy
cleaning agent. The same applies to surfaces to be painted, otherwise the paint is
unlikely to adhere well. Before gluing parts to the fuselage it is essential to
roughen the surfaces with fine abrasive paper and de-grease them with acetone
or similar solvent, otherwise you will not obtain strong, durable joints. This applies
in particular to moulded GRP fuselages.
Additional items required
Motor and accessories
Motor
Order No. Capacity
cc Silencer
Order No. Propeller
Order No. Glowplug
Order No.
OS MAX 46 AX
2701
7.45 2701.33 28 x15 cm
1316.28.15
1682
OS MAX 46 Fxi
2702
7.45 2701.33 28 x15 cm
1316.28.15
1682
OS MAX 50 SX
1933
8.12 1809.33 or
1871.72
32 x15 cm
1316.32.15
1682
OS MAX 55 AX
2715
9.0 2715.33 33 x18 cm
1318.33.18
1682
OS MAX FS 52
SURPASS
four-stroke motor
1874
8.56 1874.33 or
1411.33
30 x15 cm
1316.30.15
1680
Radio control system
For this model you require at least a five-channel RC system with six servos.