26
Description of transmitter
The “
HIDDEN MODE
” (VERSTECKTER MODUS) menu
of the
mx-12
HoTT transmitter can be accessed from
virtually any menu position by holding the arrow but-
tons
cd
of the left-hand four-way button and the
SET
button of the right-hand four-way button pressed in; after
about one second this display appears:
¿
VERSTECKTER MODUS
¿
KONTRAST
SPRACHE
0
DEUTSCH
ANSAGEN
DEUTSCH
CONTRAST
In the “CONTRAST” (KONTRAST) line you can adjust
the screen contrast to suit your preference by briefl y
pressing the central
SET
button of the right-hand four-
way button, as described in full on page 114 / 115. With
a second press of the
SET
or
ESC
button you return to
the line select point.
In the …
LANGUAGE
… (SPRACHE) line below it, which you can access by
pressing the arrow button
d
of the left-hand or right-
hand four-way button, you can select your preferred
language.
¿
VERSTECKTER MODUS
¿
KONTRAST
SPRACHE
0
DEUTSCH
ANSAGEN
DEUTSCH
HIDDEN MODE
Language selection and screen contrast
Activate the value fi eld by pressing the central
SET
but-
ton of the right-hand four-way button:
¿
VERSTECKTER MODUS
¿
KONTRAST
SPRACHE
0
ANSAGEN
DEUTSCH
DEUTSCH
Now replace the default language “DEUTSCH” (Ger-
man) with your preferred language using the arrow
buttons of the right-hand four-way button. For example:
¿
HIDDEN MODE
¿
CONTRAST
LANGUAGE
0
VOICE
DEUTSCH
ENGLISH
If you change the language, all the settings stored in the
transmitter are retained in full. When this manual went to
press, the following two languages were available:
German
•
English
•
French
•
The languages Italian and Spanish will be made avail-
able later on the Download page of the transmitter at
www.graupner.de in the form of an update.
VOICE MESSAGES
As mentioned in the section entitled “Optional head-
phone socket” on page 21, signals and messages
associated with the Telemetry menu can be generated
via the optional speech output module, in addition to the
transmitter’s audible signals. As standard these telem-
etry messages are spoken in the German language.
The messages are grouped together to form a language
pack and stored in the transmitter’s internal memory, but
it can be replaced at any time by a language pack in a
different language.
When this manual went to press, the following langua-
ges were available:
German
•
English
•
French
•
The languages Italian and Spanish will be made avail-
able later on the Download page of the transmitter at
www.graupner.de in the form of additional voice fi les.
The active voice package can be replaced using either
the PC program which can be found on the transmitter’s
Download page at ww.graupner.de, or using an SD card,
as described below.
Preparation
If you have not already done so, insert your SD or
SDHC card in the transmitter, as described on page 22.
When you switch the transmitter on, it immediately cre-
ates a “VoiceFile” folder on the memory card.
Remove the prepared memory card from the transmitter,
and insert it in a suitable card reader. Connect this to
your PC or laptop, and copy the voice package, typically
“voice_gb.vdf”, into this folder; this is the fi le which you
previously downloaded from the transmitter’s Download
page. Remove the memory card from the card reader,
and insert it in the transmitter once more. Switch the
transmitter on with RF switched off:
33112_mx12_HoTT_2_GB.indd Abs8:26
33112_mx12_HoTT_2_GB.indd Abs8:26
06.06.2011 19:39:33
06.06.2011 19:39:33
