114
Program description: basic settings
Use the arrow buttons of the left or right-hand four-way
button to leaf through to the “
basic settings
” menu point
of the multi-function menu:
mod. mem.
ser vo set.
D/R expo
wing mixer
base sett.
contr set.
phase trim
free mixer
ser vo disp
basic sett
fail-safe
telemetr y
Press the central
SET
button of the right-hand four-way
button to open the menu point:
Batt type
Batt war ning
Touch Sense
Contrast
Ni-MH
Display light
RF Countr y
Voice volume
2
4.7V
0
Euro
3
unlim
Beep volume
3
In this menu you can enter basic settings which are
specifi c to the transmitter.
Note:
Settings in this menu only need to be entered once, and
apply to the whole transmitter. This means that the last
valid settings always appear when you call up this menu
from another model memory.
Use the arrow buttons
cd
of the left or right-hand
four-way button to select the appropriate line, then press
the central
SET
button of the right-hand four-way button.
The value fi eld is now highlighted (black background),
and you can use the arrow buttons of the right-hand
four-way button to alter the default value. Pressing the
central
SET
button once more concludes the entry
process.
Battery type
Batt type
Batt war ning
Contrast
Touch Sense
4.7v
0
2
Ni-MH
Display light
unlim
In this line you inform the transmitter whether its power
is to be drawn from a four-cell NiMH battery or a single-
cell LiPo battery. The voltage range offered in the (next)
line “Battery warning threshold” will vary according to
this setting.
Simultaneously pressing the arrow buttons
cd
or
ef
of the right-hand four-way button (
CLEAR
) resets the
value in the highlighted fi eld to NiMH.
Battery warning threshold
Batt type
Batt war ning
Contrast
Touch Sense
4.7v
0
2
Ni-MH
Display light
unlim
In this line you can enter any voltage you like …
batter y
needs
charging
… within the range 4.5 to 5.5 V (NiMH battery) or 3.4 to
4.2 V (LiPo battery) - according to your choice of bat-
tery type - in increments of 0.1 Volt. However, never be
tempted to enter too low a value here, to ensure that you
always have ample time to land your model safely if a
battery warning should be triggered.
Simultaneously pressing the arrow buttons
cd
or
ef
of the right-hand four-way button (
CLEAR
) resets the
value in the highlighted fi eld to 4.7 V or 3.4 V respec-
tively.
Button response
Batt type
Batt war ning
Contrast
Touch Sense
4.7v
0
2
Ni-MH
Display light
unlim
In this line you can select the speed of response of the
four-way buttons within the range 1 to 10.
The higher the set value, the longer the button has to be
pressed before the software responds.
Simultaneously pressing the arrow buttons
cd
or
ef
of the right-hand four-way button (
CLEAR
) resets the
value in the highlighted fi eld to “2”.
Contrast
You can adjust the contrast of the
mx-12
HoTT’s in-
tegral screen to optimise its legibility in varying weather
and temperatures:
Basic settings
33112_mx12_HoTT_2_GB.indd Abs39:114
33112_mx12_HoTT_2_GB.indd Abs39:114
06.06.2011 19:39:42
06.06.2011 19:39:42
