CLEANING YOUR FIRE
(SEE COAL BED)
This product uses fuel effect pieces containing Refractory Ceramic Fibre (RCF), which are
man-made vitreous silicate fibres. Excess
i
ve exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract, consequently, it makes sense to take care when
handling these articles to ensure that the release of dust is kept to a minimum.
NOTE
:
Abrasive cleaners should never be used
.
All cleaning should be carried out when the fire is cold. As the fire is used
,
the bright metal finish around the fuel bed will darken to
enhance the fuel effect
.
There is no need to use metal polish on these parts as the discoloration is normal
.
Generally the fire would
only need dusting. Any painted surface or metal part may be cleaned with a damp cloth
.
Any stains on the glass can be remove
with a non-abrasive
cleaner or ceram
i
c hob cleaner
.
The fuel effect components
may be cleaned with a soft brush
.
It is
recommended that a vacuum cleaner is not used.
TO REMOVE THE GLASS DOOR
1. Remove the trim by pulling it off the bottom
magnets and
l
ift
i
ng upwards
.
2. Remove the door fix
i
ng screws, then
withdraw downwards and outwards
3
.
Replacement is the reversal of
r
emoval, but
slide the top of the door against the body
of the fire to ensure location in the top clip
58083
