Installers menu
The programmer has a special installers menu where some
features can be adjusted to suit your lifestyle or preferences.
To access to installers menu (INST MENU) the device must be working
in
RUN
mode (green indicator lamp RUN must be ON).
If you wish to change the settings in the installers menu, follow the
instructions below:
10 sec.
INST MENU
DIGI CLOCK
BACKLIGHT
S W CHANGE
PROG TYPE
NR PERIODS
DEFAULT PROG
PUMP GRAVITY
RESET
1. Make sure device is working in
RUN
mode.
2.
Press and hold
buttons at the same time for 10 seconds.
Z
Z
INST MENU
opens and
OK
is flashing.
3.
Confirm with
.
Z
Z
Installers menu is activated, you can change the settings.
Z
X
Press or to scroll through the menu.
Z
X
Press
to edit/confirm settings and
or to select settings.
Z
X
To cancel installers menu, press
Override
HEATING
HOT WATER
Extra Hour
Mode
DAY/
CH
RUN
TIME
OFF
am
Thu
AUTO
ONCE
CONT
EXT HOUR
+1
+2
+3
07 / 02 / 2013
ON1
OFF
AUTO
ONCE
CONT
EXT HOUR
+1
+2
+3
ON1
DHW
Override
Extra Hour
Mode
OK
Holidays
Select
button.
The following settings are possible:
Digital clock
(DIGI CLOCK)
Shows the current time (hours/minutes) in a
digital and analog clock format
Setting possibilities:
NO
: Digital clock not shown.
YES
: Digital clock shown.
If digital clock is set
YES
, you can choose
between
12 HRS (AM-PM)
or
24 HRS
format.
Backlight
(
BACkLIGHT
)
Setting possibilities:
PERMANENT ON
: Backlight always ON.
PERMANENT OFF
: Backlight always OFF.
BUTTON PRESSED
: Backlight ON when any
pushbutton is pressed. Backlight goes OFF 20
seconds after the last pushbutton press.
Auto Summer/
Wintertime
changeover
(S W CHANGE)
Automatic Summer/Winter time change.
Summer time starts on the last Sunday of March
(1:00 am to 2:00 am) and ends on last Sunday
of October (2:00am to 1:00am), then Winter
time starts
Setting possibilities:
ON
: S/W time change will be done automatically
OFF
: S/W time change will be done manually.
Programming type
1)
(PROG TYPE)
Daily
:
Weekly
1)
Week-Weekend
1)
Menu to select daily, week-weekend
1)
, weekly
1)
programming. This value will be applied
by central heating and domestic hot water
programming method.
Setting possibilities:
You can program all weekdays (Monday -
Sunday) with the same ON/OFF time schedule
You can program each day (Monday, Tuesday, ...)
with a different ON/OFF time schedule
You can program Monday - Friday with a ON/
OFF time schedule and Saturday - Sunday with
a different one.
Number of periods
(NR PERIODS)
Number of adjustable time periods defined
by ON-OFF pairs to control central heating or
domestic hot water.
Setting possibilities:
3 ON-OFF:
adjust maximum 3 ON-OFF time
periods.
2 ON-OFF:
adjust maximum of 2 ON-OFF time
periods.
Default programmes
(DEFAULT PROG)
Time programme that will appear by default
when running in AUTO mode or as base point to
customize according to users´ lifestyle
Setting possibilities:
STD
: Standard Profile
HOME
: Home Profile
ECO
: ECO Profile
Detailled explanation of the profiles see chapter
“Running a built-in programme”
Fully pumped/gravity
systems (PUMP
GRAVITY)
Fully
pumped systems (PUMPED)
Central heating (CH) and domestic hot water
(DHW) channels runs independently
Gravity systems
(GRAVITY)
Domestic hot water (DHW) is ON every time that
Central heating (CH) is ON.
Reset
(RESET)
Reset all parameters of installation menu to
factory default
All manuals and user guides at all-guides.com
all-guides.com
