■
PROGRAMMING 24 HOUR OR 7 DAY SCHEDULES
It is helpful to write out the program schedules
before beginning. See last page.
!
IMPORTANT:
THE CURRENT TIME OF DAY AND DAY OF
WEEK MUST BE SET PRIOR TO PROGRAMMING. SEE “SET-
TING THE TIME”
NOTE:
The
Day
and
Sel.
keys are used to
omit days of the week for
which the OFF or ON time is not to be implemented. For 24 hour sched-
ules (same program every day fo the week), ignore
Day
and
Sel.
keys.
If an ON or OFF symbol is not entered, the ON symbol will flash,
and program will not be accepted.
Example
Program 1:
CH1 ON at 7:00AM Monday thru Friday
Program 2:
CH1 OFF at 6:00PM Monday and Friday only
Program 3:
CH1 OFF at 5:00PM Tuesday, Wednesday and Thursday
Three programs need to be entered.
Press
Prog.
key only once. Display shows:
Program 1
(CH1 ON at 7:00AM Monday thru Friday)
Press
key once
CH1 ON symbol
appears
Press
h
key
to 07AM
Press
m
key once
to 00
Press
Day
key 6 times
flashing line appears under 6
Press
Sel.
key once to omit
6 in display flashes
Press
Day
key once
flashing line appears under 7
Press
Sel.
key once to omit
7 in display flashes
Press
Prog.
key to enter
Program 2
(CH1 OFF at 6:00PM Monday and Friday)
Press
key twice
CH1 OFF symbol
appears
Press
h
key
to 06PM
Press
m
key once
to 00
Press
Day
key twice
flashing line appears under 2
Press
Sel.
key once to omit
2 in display flashes
Press
Day
key once
flashing line appears under 3
Press
Sel.
key once to omit
3 in display flashes
Repeat
Day
and
Sel.
keys for days 4, 6, and 7
Press
Prog.
key to enter
Program 3
(CH1 OFF at 5:00PM Tuesday, Wednesday and Thursday)
Press
key twice
CH1 OFF symbol
appears
Press
h
key
to 05PM
Press
m
key once
to 00
Press
Day
key once
flashing line appears under 1
Press
Sel.
key once to omit
1 in display flashes
Press
Day
key 4 times
flashing line appears under 5
Press
Sel.
key once to omit
5 in display flashes
Repeat
Day
and
Sel.
keys for days 6 and 7
Press
Prog.
key to enter
Press
key to enter Run Mode
!
IMPORTANT:
IF AN “ON” TIME WAS PROGRAMMED THAT IS EARLI-
ER IN THE DAY THAN THE CURRENT TIME, PRESS
AND/OR
ONCE TO TURN THE TIMER “ON”. (IT DOES NOT “LOOK BACK” TO
DETERMINE IF IT SHOULD BE ON OR OFF AFTER PROGRAMMING)
■
CHANNELS
In each program, CH1 and/or CH2 can be a OFF or ON event. Also,
one channel can be an OFF event and the other an ON event in the
same program. With both channels programmed to the same ON/OFF
schedule, the timer becomes a DPDT time switch.
Example: CH1 ON, CH2 OFF at 8AM Every Day.
Press
Prog.
key once
Press
key once
CH1 ON symbol
appears
Press
key twice
CH2 OFF symbol
appears
Press
h
key
to 08AM
Press
m
key
to 00
Press
Prog.
key
to enter additional programs
■
MANUAL OVERRIDE
TEMPORARY: While in the Run Mode, pressing the
or
key once will reverse the output; ON to OFF or OFF to ON. The
or
symbol appears in the display to indicate a temporary over-
ride. At the next scheduled switching time, automatic control resumes,
eliminating the override.
CONTINUOUS: While in the Run Mode...
• Pressing the
or
key twice will turn the output to ON
permanently.
symbol appears in display.
• Pressing the
or
key three times will turn the output OFF
permanently.
symbol appears in display.
• To terminate a continuous override, press the
or
key
until
appears in the display.
■
REVIEWING PROGRAMS
To review the programs at any time, press
Prog.
key. Programs will
appear in the order they were entered with repeated presses of the
Prog.
key. After all programs have been reviewed, the blank display
will appear to allow entering another program. Another press of the
Prog.
key will display the number of free programs available, such as
Fr 38
if 4 programs have been entered.
■
CHANGING A PROGRAM
Select the program to be changed with the
Prog.
key. New days
may be omitted or omitted days may be returned by using the
Day
and
Sel.
keys just as in initial programming. Hour and minute can be
changed with the
h
and
m
keys.
Press
Prog.
or
key to store the new program.
■
DELETING A PROGRAM
To delete only one or a few programs:
Press
Prog.
key until the desired program is displayed.
Press
m
key to
:59
and press once more to blank out.
Press
h
key to
11PM
and press once more to blank out.
Press
key, display will flash for several seconds and then enter
the Run Mode.
Using the reset key will delete ALL programs, the time of day, and
daylight change dates.
