Grasshopper 623T, Руководство оператора и список запчастей

Страница: 18 / 48

18
WARNING
Fig. 3
10001
RIGHT BYPASS VALVE
LEFT BYPASS VALVE
MOVING UNIT WITHOUT POWER
The tandem hydro pump is equipped with by-
pass valves that allow the unit to be moved
without power by deactivating the pump. With
the bypass valves in normal operating posi-
tion, the fl uid in the pump will make it diffi cult
to move the unit (even with the steering levers
in neutral position). The bypass valves are
located on the right side of the pump. Activate
each bypass valve by rotating one revolution
counter-clockwise with a .625 inch socket.
When BOTH bypass valves are activated the
unit becomes “freewheeling”, allowing it to be
moved. Before the hydro pump becomes op-
erational, the bypass valves must be returned
to their normal operating position.
Do not
tighten above 120 in lbs (10 ft lbs) maxi-
mum.
STEERING LEVER OPERATION
(refer to Fig. 4)
Do not move steering levers from
forward to reverse or reverse to for-
ward position rapidly. The sudden
change could cause loss of control
or damage to equipment.
The Grasshopper tractor is very un-
stable without an attachment. Move
very slowly when attachment is re-
moved. Never carry passengers.
Steering levers control speed and direction
of movement. Pushing the levers forward will
move the tractor forward. Pulling levers to the
rear will move tractor in reverse. The further
forward or rearward the steering levers are
moved, the faster the machine will move.
At half throttle move both steering levers from
swing-out neutral inward. Move both steering
levers forward. To turn right, advance left le-
ver further forward than right lever. To turn left,
advance right lever further forward than left
lever. If you leave one steering lever in neutral
and advance the other lever, the tractor will
turn a complete circle. Move the levers to the
rear and practice turning and maneuvering
in reverse. Once you learn how the controls
operate, practice until you become profi cient
and are comfortable with the unit before you
begin operation with an attachment.
If you become confused during op-
eration release both steering levers,
they will automatically return to the
centered neutral position and the
tractor will stop.
IMPORTANT