GRASS GRASS ECOPRESS, Руководство по эксплуатации

Страница: 5 / 84

5
1. General Information
The star in your cabinet
1-001 List of Illustrations
Illustration Description Page
3-006 Miscellaneous standard accessories 12
4-001-01 Overall view of the Ecopress-Pneumatic 14
4-001-02 Overall view of the Ecopress-Manual 14
4-002-01 Machine table 16
4-002-02 Motor support 16
4-002-03 Machine frame of the Ecopress-Pneumatic 18
4-002-04 Machine frame of the Ecopress-Manual 18
4-002-05 Electrical switch box of the Ecopress-Pneumatic 20
4-002-06 Electrical switch box of the Ecopress-Manual 20
4-003-01 Hole line boring - Standard gear box 22
4-003-02 Hole line boring 5-spindle hole line boring gearbox 22
4-004-01 Operating features of the Ecopress-Pneumatic 24
4-004-02 Operating features of the Ecopress-Manual 24
4-006-01 Pneumatic wiring diagram for the Ecopress-Pneumatic 26
4-007-01 Electric wiring diagram 28
5-003-01/..../04 Assembly of the Ecopress 30
5-003-05/..../10 Mounting the hand lever of the Ecopress-Manual 32
7-201-01 Mounting the drill bit 34
7-202-01/02 Mounting the insertion die 34
7-203-01/..../04 Mounting the 5-spindle hole line boring gearbox 36
7-204-01/..../04 Mounting the pendulum stop 38
7-301-01 Adjusting the boring depth 40
7-302-01 Adjusting the boring distance 40
7-303-01 Adjusting the boring speed with the Ecopress-Pneumatic 42
7-304-01 Adjusting the turn-on time of the E-Motor with the Ecopress-Pneumatic 42
7-305-01 Adjusting the turn-on time of the E-Motor with the Ecopress-Manual 44
7-306-01 Adjusting the side stops 44
7-307-01.../03 Operating the stop adjustment gauge 46
7-308-01 Operating the index ruler 48
7-309-01 Adjusting the pneumatic hold down clamps 48
7-401-01/02 Drilling and inserting the Grass hinges 50
7-402-01/02 Drilling and inserting the Grass baseplates 52
7-403-01/02 Drilling the hole line borings 54
7-404-01/02 Drilling the fronts 56
7-405-01/02 Drilling the back panels 58
7-406-01/02 Drilling and inserting the visible hinges 60
7-407-01/02 Drilling and inserting fastening hardware 62
7-408-01/02 Drilling of handle bore holes 64
8-001-01 Adjusting the boring distance scale 66
8-005-01/02 Adjusting the insertion arm 68