Chapter 3 Servicing the PFR500/E
42
PFR 500/E Instruction Manual
16 October 2001
Installing the LBB or RAID Controller
To install the LBB or RAID Controller:
1. Insert the replacement into the empty bay. Make sure the module is seated.
2. Push up the two ejector levers to seat the module.
3. Tighten the captive screws.
Replacing GBIC data ports
The PFR 500/E ships with passive copper data ports installed in the RAID Controller
and Loop Bypass Board (LBB) modules.
To replace the GBIC:
1. Remove cabling and remove the GBIC as shown.
2. Insert the replacement GBIC into the module as shown, then reconnect cabling.
2904
