GRASS VALLEY LDK 3000 -, Руководство пользователя

Страница: 48 / 102

48 LDK 3000 HD camera User’s Guide (v1.0)
Chapter 4 - Operating instructions
4.8 Managing files
You can have access to 15 different files. The Files menu is used to recall and store these files.
There are two types of file:
• scene files
• operator files
A scene file contains values related to the picture performance. The operator file contains
values related to the set-up of the camera (viewfinder, lens and installation parameters). The
tables in
“Menu structure and contents” on page 63 and further indicate the functions that are
stored in the scene file and those functions that are stored in an operator file.
4.8.1 Scene files
Four scene files are stored in the camera itself (SCAM1..4). The STANDARD scene file
(preselected as either factory or customer defined) is stored in the camera.
☞
Note
☞
Note
The standard customer scene file is stored via the
SECURITY
menu, not the
FILES
menu. The
decision to use the factory defined file or the customer defined file as the standard file is also
made in this menu.
The
FILES
menu enables the scene files to be stored and recalled using the store and recall
entries of the menu system. If the message
NOK
is displayed, then the old values are restored.
If the camera is On Air when a scene file is recalled, then the recalled values do not become
active until the camera goes off air.
4.8.2 Operator files
The
FILES
menu also allows the recall of the operator file stored in the camera (OCAM1..4).
These files contain information for setting up the non-video configuration of the camera. A
STANDARD operator file (factory or customer defined) is stored in the camera.
☞
Note
☞
Note
The standard customer operator file is stored via the
SECURITY
menu, not the
FILES
menu.
The decision to use the factory defined file or the customer defined file as the standard file is
also made in this menu.