manualshive.com logo in svg

GRASS VALLEY Kayenne XL Package, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY Kayenne XL Package Скачать руководство пользователя страница 552

552

Kayenne XL Package  —  User Manual 

Section 5 — Menu Summaries

 

Highlight Eff Number 

This feature is for help to get a quick overview of which channel is used in 
which effect. This is most important for customers using the eDPM option 
as multiple single Channel DPM! 

The overlay row is special and consists of two parts, which have to be 
selected independently.

•

no show

 - No highlighting.

•

1 incl.

 - Highlight all effects which contain at least one of the selected 

channels.

•

all incl.

 - Highlight all effects which contain all of the selected channels.

•

exact

 - Highlight all effects which contain exactly the selected channels.

•

--- / chan 1

 - Toggle selection channel 1 on/off.

•

--- / chan 2

 - Toggle selection channel 2 on/off.

•

--- / chan 3

 - Toggle selection channel 3 on/off.

•

--- / chan 4

 - Toggle selection channel 4 on/off.

•

--- / global

 - Toggle selection global: on/off.

Use DPM Source (for Channel 1-4)

If any DPM Channel is enabled for 

Use DPM Source

, a loaded DPM effect 

will recall the crosspoint related to the information formerly saved per Key-
frame. 

Note

The settings for enabling or disabling "Use DPM Source" are EMEM sensitive 
and can be effected in TiM/EMEMo / Define Memo / eDPM Send Channel 1-4.

Modify

•

Rename

 - Rename selected effect.

•

Cut

 - Cut out selected effect into Clipboard.

•

Copy

 - Copy selected effect into Clipboard.

•

Paste

 - Paste Clipboard into Cursor destination.

•

Swap

 - Exchange selected Cursor positions. 

•

Undo

 - Undo last action (does not recover deleted effect).

•

Delete

 - Delete selected effect.

•

Lock

 - Enable/Disable write protection/read only.

Содержание Kayenne XL Package

















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды