GRASS VALLEY Kayenne XL Package, Инструкция по установке и обслуживанию

Страница: 99 / 186

Kayenne XL Package — Installation and Service Manual 99
Pin Assignments
Refer to the Install Menus section of the Kayenne XL User Manual for details
on setting the input signal activating edge.
Refer to the Configuration Menu section of the Kayenne XL User Manual for
details on setting the function of a GPI input.
GPI / Tally Outputs
There is a great deal of flexibility in the hardware and programmability of
the GPI / Tally outputs.
Outputs are arranged in groups of four. Each group has its own common
connection. These are labeled GPI_OUT_COM_A through
GPI_OUT_COM_H for the first connector (corresponding to GPI /Tally
OUTs 1 - 32). These commons can all be tied together, forming one common
bus for all 32 outputs. Alternatively, multiple smaller commons can be con-
structed to interface with systems that need isolated common connections.
This common or isolated bus scheme can extend across multiple connec-
tors. For example, a 4 M/E system could have all commons of all connec-
tors tied together. All 128 relay closures will connect to one common bus.
Another case may require two isolated common busses - half of the
commons form the first common bus and the other half form the second
common bus.
The example in Figure 64 on page 100 shows two common busses. The first
four outputs (COMMON A) have the common bus tied to ground. This
drives a logic system. The last outputs (COMMON G & COMMON H)
have the common bus tied to +12 volts. This drives a tally lamp system.