GRASS VALLEY Kayenne XL Package, Инструкция по установке и обслуживанию

Страница: 86 / 186

86 Kayenne XL Package — Installation and Service Manual
Section 4 — System Cabling
Satellite Panel Mapping
If you connect a Satellite Panel the right mapping to an existing M/M stripe
has to be observed.
Rules
Please note the following simple rules.
• An M/E stripe is determined by the existence of a crossbar module

(Rool: No crossbar module, no M/E stripe).
• Local EMEM and Transi Modules are M/E stripe extension modules.
• One Local EMEM within an M/E stripe is necessary to be able to assign
M/Es.
• A Local EMEM (or Transi) Module which is in a stripe without a
crossbar module are mapped to an M/E stripe in the neighbourhood to
supply 1M/E panel layout .
Connection Example
The right mapping will be made by connecting the Satellite Panel to the
proper PCU Port. If a Satellite Panel should be assigned to a special M/E
stripe, identify the port number of this M/E first and use the next higher
port number to connect the Satellite Panel.
Note Satellite Panels equipped with Aux, Master EMEM, Multi Function Control and
Machine Control Modules no special port mapping is neccessary!
Table 13. PCU Port to Control Panel Stripe Connections - Without Satellite Panel
Control Panel Model PCU Port Panel Stripe
4-ME with Local Aux
1 ME 1 (top ME)
2 ME 2 (second ME)
3 ME 3 (third ME)
4 ME 4 (bottom ME)
5 Local Aux Stripe
Table 14. PCU Port to Control Panel Stripe Connections - With Satellite Panel Mapped to ME2
Control Panel Model PCU Port Panel Stripe
4-ME with Local Aux
and Satellite Panel mapped
to ME 2
1 ME 1 (top ME)
2 ME 2 (second ME)
3 Satellite Panel
4 ME 3 (third ME)
5 ME 4 (bottom ME)
6 Local Aux Stripe