manualshive.com logo in svg

GRASS VALLEY Kaleido-X16, Руководство по описанию и установке оборудования

Поделиться
Скачать
GRASS VALLEY Kaleido-X16 Скачать руководство пользователя страница 16

4

Kaleido-X16 Installation

Mechanical Installation

Mechanical Installation

Unpacking

Make sure the following items have been shipped with your 

Kaleido-X16

. If any of these are 

missing, contact your distributor or Grass Valley.

•

Kaleido-X16

 unit with one or two power supplies pre-installed (second power supply 

optional)

• Two support brackets

• One AC power cord per power supply

• DVD including manuals, software and release notes

• One  mouse

• Four serial port adapters (one with straight wiring and one with crossover wiring for 

each of the two RS-422 ports on your multiviewer):

Mounting the Kaleido-X16 in a Rack

To mount the Kaleido-X16 in a standard 19-inch rack

1 Install both support brackets at the back of the rack by using suitable screws and 

washers (not included), so that the bottom of the Kaleido-X16 frame will be supported 
by the brackets.

Part number

Adapter cabling

RS-422 pinout at the DE-9P connector

1737-3000-102

Straight

Controller (SMPTE master) mode

1792-3700-100

Crossover

Tributary (SMPTE slave) mode

Notes 

• The Kaleido-RCP2 unit is optional and is not included in the standard 

Kaleido-X16 package. Refer to the Kaleido-RCP2 Guide to Installation and 
Operation (available on the DVD that shipped with your system) for more 
information.

• The standard Kaleido-X16 comes with one PSU. A redundant, second PSU 

is optional.

Содержание Kaleido-X16














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды