GRASS VALLEY Kaleido-IP X110, Быстрый старт

Страница: 35 / 47

23
Kaleido-IP X310/X110
Quick Start Guide
• importing transport stream configuration information, from a spreadsheet
• adding HLS transport streams
• adding source-specific or source-filtered multicast (SSM or SFM) transport streams
• adding any-source multicast (ASM) transport streams
Adding a Multicast Transport Stream
To add a multicast transport stream
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, right-click the appropriate network adapter for the
source you wish to add, and then click insert Multicast .
The Multicast Stream Configuration window appears.
3 In Multicast Stream Configuration , replace the default stream name if desired, select
the appropriate protocol (RTP, UDP), and type the multicast group address and port
number associated with the transport stream you wish to add.
4 In the case of an SSM (or SFM) stream, select the Source specific multicast (SSM) check
box, and then type the IP address associated with the specific source you wish to
monitor in the
Source IP address box.
5 Click OK .
Notes
• The Kaleido-X Software supports UTF-8 encoded stream names. The only
characters, which cannot be used in a stream name are:
@ / \ '
and
"
.
• Verify the protocol you selected. Registering an RTP stream as UDP instead
of RTP may result in the decoded video appearing jerky or accelerated on
the monitor wall.
Note:
In the case of streams that are available from the same multicast
group address and port number, you must enter the source IP address
associated with a stream before you can add the next one.